Your cart is currently empty.
The Nikon Z7 II takes everything that was great from the original and ups its capabilities even more. Sporting a high-resolution 45.7MP FX-format BSI CMOS sensor and dual EXPEED 6 image processors, the Z7 II is clearly aimed at the detail-obsessed image maker. Updated processing also yields faster speeds, including a quickened 10 fps continuous shooting rate and deeper buffer for working with moving subjects. UHD 4K 60p video is supported, too, with the option to record externally in 10-bit using N-Log or HLG (HDR) modes). The sensor also incorporates a 493-point phase-detection AF system, which now supports Eye-Detect AF in Wide-Area AF modes and during movie recording, and permits focusing in low light down to -4.5 EV. Both a high-res 3.6m-dot OLED EVF and rear 3.2" 2.1m-dot tilting touchscreen LCD lend versatility to image composition and playback, and SnapBridge wireless connectivity can be used for remote camera control, image sharing to a mobile device, and even over-the-air firmware updates. Dual EXPEED 6 image processors offer increased buffer performance, a faster 10 fps continuous shooting rate, and noticeably reduced blackout times in the viewfinder. Timed long-exposure shooting is now possible for up to 900 seconds (15 minutes) without the need for an external remote.USB Type-C port permits in-camera charging or continuous power for on-the-go charging or extended shooting times. Support for HDR (HLG) mode when recording externally gives instant HDR-suitable video files for immediate playback. N-Log is also available for enhanced control during post-production and grading, too. The SnapBridge wireless connectivity can be used to update the camera's firmware, instead of relying on a memory card-based system of updating.
Advanced video functionalities have been added with the Z7 II, including the N-Log gamma for capturing flat-looking footage that maximizes dynamic range and HLG (HDR) for recording HDR-ready footage. Other additions are the ability to output high-quality 10-bit data over HDMI and an Electronic VR function for smooth handheld shooting. Focus Peaking can be used to benefit manual focus control and a Zebra Stripes option is also available to help detect over-exposed areas within the frame. Audio recording can be handled using the built-in stereo microphone or an optional external mic can be added via the 3.5mm stereo jack for greater control over quality, and live monitoring is possible via the headphone jack. This provides fast and accurate focusing for both stills and video and with a wide coverage area, subject tracking will work out to near the edges of the frame. Hybrid AF is available for video, which will automatically switch between phase- and contrast-detect systems to provide smooth focus during shooting. Additionally, the latest NIKKOR Z lenses are optimized for silent operation. A large 3.2" 2.1m-dot LCD screen is available for bright, clear, and vivid image playback and live view shooting. The screen has a tilting design to benefit working from both high and low angles, and it is also a touchscreen for more intuitive operation, navigation, and settings control. The top panel of the Z7 II is configured with a dot-matrix OLED. This low-energy display provides quick access to important camera settings.
Included with the camera body is the standard zoom NIKKOR Z 24-70mm f/4 S lens, which covers a wide-angle to portrait-length range and features a constant f/4 maximum aperture. A Nano Crystal Coating is also used to control flare and ghosting for increased contrast in strong lighting conditions. Suiting both photo and video applications, a stepping AF motor is also featured for smooth, near-silent autofocus performance. The flash-ready light on SB-5000 flash units will light if a WR-R10 or WR-R11b is used for wireless remote flash photography.
The FTZ Mount Adapter is a sophisticated means for expanding the range of usable lenses. While compatible with approximately 360 distinct F-mount lenses, this adapter is especially ideal for use with over 90 E, and G-type lenses, where it fully maintains autofocus and auto-exposure capabilities for seamless use of the SLR lenses on the mirrorless body. The adapter is built from magnesium alloy and is weather-sealed, and also incorporates a 1/4"-20 mount on the base to provide a more balanced means for working on a tripod with longer, heavier lenses.
Nikon Z7 II Specs...
|Actual: 46.89 Megapixel
Effective: 45.7 Megapixel (8256 x 5504)
|35.9 x 23.9 mm (Full-Frame) CMOS
|Built-In ND Filter
|Stills & Video
|Mechanical Focal Plane Shutter, Electronic Shutter
|Electronic Front Curtain Shutter
1/8000 to 900 Seconds
|Bulb Mode, Time Mode
64 to 25,600 in Auto Mode (Extended: 32 to 102,400)
|Center-Weighted Average, Highlight Weighted, Matrix, Spot
|Aperture Priority, Auto, Manual, Program, Shutter Priority
|-5 to +5 EV (1/3, 1/2 EV Steps)
|-3 to 17 EV
|Presets: Auto, Cloudy, Color Temperature, Direct Sunlight, Flash, Fluorescent, Incandescent, Preset Manual, Shade
|Up to 10 fps at 45.7 MP for up to 50 Frames
5408 x 3600
4048 x 2696
2704 x 1800
5504 x 5504
4128 x 4128
2752 x 2752
8256 x 4640
6192 x 3480
4128 x 2320
|1:1, 3:2, 4:5, 16:9
|Image File Format
|H.264/MOV/MP4 4:2:0 8-Bit
UHD 4K (3840 x 2160) at 23.98p/25p/29.97p/59.94p
Full HD (1920 x 1080) at 23.98p/25p/29.97p/50p/59.94p/100p/119.88p
|Up to 29 Minutes, 59 Seconds
|Built-In Microphone Type
2-Channel LPCM Audio
|External Recording Modes
|4:2:2 10-Bit via HDMI
UHD 4K (3840 x 2160)Full HD (1920 x 1080)
|Media/Memory Card Slot
|Slot 1: CFexpress Type B / XQD
Slot 2: SD/SDHC/SDXC (UHS-II)
|1 x Mini-HDMI Output
|1 x 1/8" / 3.5 mm TRS Stereo Headphone Output
1 x 1/8" / 3.5 mm TRS Stereo Microphone Input
|1 x USB Type-C (USB 3.2 / 3.1 Gen 1) Data Input/Output (Shared with Power Input)
1 x Nikon DC2 Input
|1 x USB Type-C Input/Output
|Global Positioning (GPS, GLONASS, etc.)
|Tilting Touchscreen LCD
|Top: Status Display
|-4 to +2
|Auto and Manual Focus
|Continuous-Servo AF, Full-Time Servo, Manual Focus, Single-Servo AF
|Phase Detection: 493
|First-Curtain Sync, Off, Rear Curtain/Slow Sync, Rear Sync, Red-Eye Reduction, Slow Sync, Slow Sync/Red-Eye Reduction
|Maximum Sync Speed
|-3 to +1 EV (1/3, 1/2 EV Steps)
|Dedicated Flash System
|External Flash Connection
|32 to 104°F / 0 to 40°C
|0 to 85%
|1 x EN-EL15c Rechargeable Lithium-Ion
|Tripod Mounting Thread
|1 x 1/4"-20 Female (Bottom)
|1 x Hot Shoe Mount
|Material of Construction
|Dimensions (W x H x D)
|5.3 x 4 x 2.7" / 134 x 100.5 x 69.5 mm
|1.4 lb / 615 g (Body Only)
Nikon Z 24-70mm F/4 S Lens Specs...
|24 to 70mm
|Angle of View
|84° to 34° 20'
|Minimum Focus Distance
|11.81" / 30 cm
|14 Elements in 11 Groups
|72 mm (Front)
|Dimensions (ø x L)
|3.5 x 5" / 89 x 126 mm
|1.1 lb / 500 g
Nikon 4185 Specs...
|Nikon Lens Compatibility
|Tripod Mounting Thread
Package Contents :
- Nikon Z 7II Body with 24-70mm f/4 S Lens
- Nikon 24-70mm f/4 S Lens
- Nikon Rechargeable Lithium-Ion Battery
- Nikon Battery Charger for Li-Ion Battery
- Nikon Charging AC Adapter
- Nikon USB Cable
- HDMI/USB Cable Clip
- Hot Shoe Cover for Nikon SLR Cameras
- Nikon Camera Strap
- Nikon Body Cap
- Nikon Rubber Eyecup
- Nikon FTZ Mount Adapter
- Nikon Rear Lens Cap
Free Shipping on ALL Orders*
We offer free regular shipping on all orders. GadgetWard ships orders of any size to any address in Australia with no extra cost. To make sure you receive your order as quickly as possible, and with the greatest variety of cost options, we ship through FedEx Priority Shipment.
Orders completed at or before 7:00 PM (AEST) will be packaged and shipped within 1-2 business day.
Shipments and deliveries are processed on weekdays. Orders placed after 7:00 PM (AEST) on Friday, or on a Saturday or Sunday, will be processed on Monday or Next Business Day.
Delivery times are based on our best approximations and cannot be guaranteed. Estimated delivery times for shipments to the AUSTRALIA are based on estimates from our shipping partners. Some shipments may be delayed due to remote locations and this will affect delivery time.
Tracking Your Order
With the exception of lettermail shipments, all orders can be tracked through the “Your Account” page on the GadgetWard AU Parts website.
To track your order, simply enter the tracking number you have been provided after your shipment was processed. If you have not received a tracking order, your order has not yet been processed.
Damaged in Shipment
If you receive a product that was damaged in shipment, please contact firstname.lastname@example.org within 24 hours from the receipt of the delivery and we’ll open a claim with the Courier Company on your behalf.
Please keep the box, the packaging, and the contents of the order to expedite your claim. Claims will require approximately two weeks for processing and replacements will be organized as needed.
Standard Return Policy for Electronics:
We accept product back under receipt of faulty product or DOA. We don't accept returns based on change of mind. It is customer's responsibility to notify us for DOA or Faulty product within 24 hours from the time of receipt the delivery to get replacement or refund. Still wish to return within 30 days from the delivery date then we will charge 30% restocking fees on the total order price. Product must not have any scratch or dent and must be in returnable condition with all original package contents to qualify for full refund. With the exception of items damaged during shipments, customers are responsible for shipping charges when sending items back to our warehouse.
Warranties are different based on Brand.
Camera: 2 Years Warranty
Camera Lens: 5 Years Warranty on Canon, Fujifilm, Nikon, Panasonic, Olympus, Sony, Samyang
7 Years Warranty on Sigma, Tamron
Mobile Phone/Tablet: 1 Year Warranty
All Accessories: 6 Months Warranty
How to Claim Warranty?
- When customer gets issue in Product during the Warranty Period, customer need to contact us via email. We will provide shipping label to send product back to us, we will get it repaired from Manufacturer and send it back without any extra cost.
- Human error will not be covered under warranty.
- Any unauthenticated app downloading and/or flashing the product will not be covered under the warranty.
- Warranty resolution time: 3-4 weeks from the date of product received at our warehouse.
All products are covered by the manufacturer’s warranty (In Particular Manufacturing Country) no matter where purchased by original purchaser with actual proof of purchase. The manufacturer’s warranty includes workmanship and materials but not normal wear and tear.
GadgetWard branded products have a limited lifetime warranty (unless otherwise specified). We will repair or replace at our discretion.
GadgetWard’s warranty provides coverage for defects in manufacturing only, and expressly excludes coverage for excessive wear and tear and/or physical/accidental abuse, loss and theft. The warranty is valid only at GadgetWard. Improper repair or warranty service performed by someone other than GadgetWard will void this warranty.
GadgetWard disclaims any liability for consequential or incidental damages, for breach of written or implied warranty of an item, including merchantability or fitness for a particular purpose.